16 Hidden Workplace Hazard Examples - SafetyFrenzy (2023)

In this article, we will discuss different workplace hazard examples. Hazards exist everywhere. While the output, profit, and employee motivation are directly related to workplace safety.

It is the responsibility of the organization to provide a hazard and risk-free working environment to their employees.

I work as an engineer in a very big organization. As every workplace we have many hazards and safety issues that I face every day in the work site.

I will start with the common hazards and at the end of the article I will mention some hidden workplace hazards as I see in my organization.

(Video) Apple iOS 16 – 14 Settings You MUST Change on Launch

  1. Fire Hazards

One of the most common types of hazard at the workplace is Fire. Fire can cause injuries and damages to the property.

And it is a threat to both human lives and organization sustainability. Therefore, it is important to educate and train organization employees on fire hazards.

It is important that the workplace and its employees are ready to mitigate any hazard. For fire hazards install smoke detectors and fire alarms. Besides this make sure the availability of fire extinguishers and fire sprinkler system.

Read also

  • How to ensure Fire protection at workplace?
  • How to Ensure Electrical Fire Protection
  • Fire Suppression System
  1. Electrical Hazards

Next in the workplace hazard examples is electricity. It is one of the important sources on which an organization operates.

The unsafe use of electricity may cause electrocution. Electrical shocks are fatal and it is important to follow safety precautions while working on electric devices.

Make sure that the device is fault-proof and the employees have enough knowledge to operate the device. Always check for the device before start operation.

For more details read our other article: How to avoid electrical hazard at work?

(Video) Transgender Rights II: Last Week Tonight with John Oliver (HBO)

  1. The next Workplace Hazard Examples are Slip, Trips & Fall

The next workplace hazard consists of Slips, Trips, and falls. Sometimes workplace area is slippery and slip occurs when a person walking on it.

Trips occur when a person is hit by an obstacle. Like different types of substances are laying in the workplace, so when the foot collides the falling of person occurs.

To avoid this hazard:

  • make sure the surface area is properly dried after cleaning.
  • Besides this use safety shoes having a greater fraction ratio between walking surface and shoes.
  • Proper housekeeping and placing of tools at the right place can eliminate the risk of trips and falls.

Related: Slip trips and fall hazard How to avoid?

  1. Chemicals

Chemicals may be more hazardous to human health and the workplace. The proper storage and proper handling can eliminate this risk.

Make sure that the employees use relevant PPE while handling chemicals. They have enough knowledge and proper procedure to deal with chemicals. The labeling of chemicals may also be beneficial.

  1. Workplace hazard examples – Noise and Radiations

These two types of workplace hazards have no physical availability. But they exist and are extremely hazardous. Workers working in noisy places often lose their listening ability.

While radiation can affect your skin and have a negative impact on employee’s health.

Both of these workplace hazards must be laminated to promote a safe workplace environment.

6.Driving hazards

Driving cars and heavy trucks is one of the most risky tasks. The shapes of hazards while you are driving are countless, Below are some of the common hazards that you may face.

  • Other road users faults.
  • Road hazards like snow, rain and dusty weather.
  • Driving long distances without rest.
  • Being distracted with eating, chatting, making phone calls etc.

For more information about safety driving read our articles:

(Video) A Favor in Kind | Critical Role | Campaign 2, Episode 16

  • Driving Safety Rules and Tips
  • What is Defensive Driving?

7.Confined Spaces

A confined space is any area not designed for workers regular work, And has small openings for entrance, and may have no ventilation openings.

Lack of oxygen, poisonous gases, explosive atmosphere and high temperature are common hazards in the confined spaces.

8.Moving Machinery

Moving objects can cause many serious injuries and fatalities. Rotating objects should be properly protected, And in case of maintenance work a LOTO system is essential for both mechanical and electrical power.

9.Careless Workers

This is one of the most common and dangerous hazards at work. This type of workplace hazard is almost a strong source of all other hazards. It can cause fatalities and injuries to him self and to others as well.

Those careless workers should be trained, warned and then punished if they still careless.

10.Bad Weather

Bad weather is a big hazard that can cause injuries and accidents. Bad weather hazard has many shapes like,

  • Hot weather can cause fire accidents for combustible material or sunstroke for workers. A good PPE program and good storage for material should prevent these hazards.
  • Cold weather affect workers.A proper PPE for cold weather can help.
  • Rainy weather affect driving and transportation tasks and also electrical outside work. Never work outside in electrical work under rain.
  • Sand storm and high speed wind. Working at height in windy weather is risky. Similarly sand storms makes driving and transportation tasks high risk tasks. This is because the visibility in sand storm become hard and to a short distance.

11.Rush in work – workplace hazard examples

One of the hidden hazards at work is to work faster than usual to finish the work early or to just complete the task in scheduled time. Supervisors and managers can cause a disaster while they are forcing workers to finish.

A good time management can help workers to finish tasks on time and the most important safely.

12.Production First

16 Hidden Workplace Hazard Examples - SafetyFrenzy (1)

Almost all organizations have the slogan SAFETY FIRST, but not all of them act according to this big meaning.This is an other hidden hazard.

The slogan means to stop any task if it has uncontrolled hazard. And never start the task until it is safe for both workers and assets.

(Video) Highlights of the Jordan Peterson debate at the University of Toronto

I worked for a factory with PRODUCTION FIRST slogan. There were no safety culture, PPE program or any kind of safety rules. Once a worker was hit by a forklift because both the worker and the driver has no safety acts.

13.Lack of Safety Culture

Supervisors and top managers have no ability to attend all tasks, specially in large organizations. So to make sure that workers committed to the safety program, workers safety culture only can ensure this.

When workers be aware of the hidden hazards and know their responsibility towards themselves, co-workers and the organization, then and only then they will committed to the safety program.

14.Snakes, Scorpions and Reptiles

Working in a desert is risky. I work in the desert, This desert is the place and home of Snakes, scorpions and reptiles. To these creatures we are the enemies who came to their home and we are destroying it, And also we threatens the lives of these Snakes, Scorpions and Reptiles and their babies.

But to humans we need this work, To do this work we must take care and use our full Personal protective equipment when working around the dangerous creatures.

Every site has its own hazard creatures. An authorized agency can help in dealing safely with these creatures.

14.Driving for long distances

Some organizations, like the one I work for, has long distances that need driving for too long to finish tasks. To complete your driving safely you should stop, get out of your car, stretch your legs and take a rest every two hours.

Its better to assign two experienced drivers for long distances driving tasks.

15.Another hidden workplace hazard example is to get lost

16 Hidden Workplace Hazard Examples - SafetyFrenzy (2)

Working in the desert or in the sea has a hazard of getting lost in the sea or the desert.

I work in the desert, The work site is very large enough to get lost if you are new in work, Fortunately I didn’t, But some of my co workers did.

(Video) MASS PSYCHOSIS - How an Entire Population Becomes MENTALLY ILL

Some tips to overcome this hazard.

  • Using smart devices with modern GPS feature can help to protect workers from this hazard.
  • Also a good training for new workers about the desert or the sea hazards will keep them safe.
  • An emergency plan for lost situation should be ready all the time, and well designed for immediate action in case of some one lost.
  • Using satellite based mobile phones is the best choice in these locations.
  • Cars should always have enough clean water.
  • Before any traveling task, make sure that your supervisor and safety team know about your task, So that they can contact you each 2 hours to make sure you are safe.

16.Unqualified Workers

Unqualified persons are a workplace hazard examples, that can lead to high risk situation.

When performing special tasks like electrical repairs, mechanical repairs, driving cars and trucks, operating rotating machines, etc. These tasks need authorized well trained and qualified workers only to perform. No exception in this.


What are some examples of hidden hazards? ›

There are also three hazards in the workplace that are less obvious. These are referred to as hidden hazards. They are: workplace stress workplace bullying alcohol and other drug misuse.

What are some examples of workplace hazards explain? ›

Working from heights including ladders, scaffolds, roofs, or any raised work area; Unguarded machinery and moving machinery parts; guards removed or moving parts that a worker can accidentally touch; Electrical hazards like frayed cords, missing ground pins, improper wiring; Confined spaces; and.

How do you find hidden hazards? ›

Here are some tips on how to uncover the hidden hazards in your workplace.
  1. Check accident records. ...
  2. Ask your employees. ...
  3. Check chemical data sheets and manufacturer's instructions. ...
  4. Think about the non-routine tasks. ...
  5. Contact trade associations. ...
  6. Think long term.

What is the meaning of hidden dangers? ›

Noun. A situation deliberately designed to ambush or trick someone. booby trap.

What are the 10 most common hazards in the factory? ›

10 Most Common Workplace Hazards
  1. Falls from Work at Height and Falling Objects. Falls from heights are among the most common and serious workplace injuries. ...
  2. Machinery Malfunction. ...
  3. Electrical. ...
  4. Fire. ...
  5. Confined Spaces. ...
  6. Physical. ...
  7. Ergonomic. ...
  8. Chemical.
26 Feb 2021

What are the 6 common hazard and risk in workplace? ›

Workplace hazards fall into six core types – safety, biological, physical, ergonomic, chemical and workload.

What are the 5 types of safety? ›

What the Five Types of Safety Controls Look Like in Practice
  • Elimination: Physically remove the hazard.
  • Substitution: Replace the hazard.
  • Engineering controls: Isolate people from the hazard.
  • Administrative controls: Change the way people work.
  • Personal protective equipment (PPE): Protect the worker.
22 Jun 2021

What are the 10 top reasons why workplace safety is important? ›


What are some examples of workplace hazards Class 10? ›

Answer: An occupational hazard is a hazard encountered at work. Chemical hazards, biological hazards, psychosocial hazards, and physical hazards are all examples of occupational hazards.

What are the 6 types of hazards in the workplace PDF? ›

Workplace hazards fall into six core types – safety, biological, physical, ergonomic, chemical and workload.
  • 1) Safety hazards. ...
  • 2) Biological hazards. ...
  • 3) Physical hazards. ...
  • 4) Ergonomic hazards. ...
  • 5) Chemical hazards. ...
  • 6) Workload hazards.
8 Aug 2019

What are ten 10 common sources of slips trips or falls occurring in the workplace? ›

Common causes of tripping are:
  • obstructed view.
  • poor lighting.
  • clutter in your way.
  • wrinkled carpeting.
  • uncovered cables.
  • bottom drawers not being closed.
  • uneven (steps, thresholds) walking surfaces.

What are the 6 types of hazards? ›

The six main categories of hazards are:
  • Biological. Biological hazards include viruses, bacteria, insects, animals, etc., that can cause adverse health impacts. ...
  • Chemical. Chemical hazards are hazardous substances that can cause harm. ...
  • Physical. ...
  • Safety. ...
  • Ergonomic. ...
  • Psychosocial.
7 Jan 2019

What are the 4 types of hazards? ›

There are four types of hazards that you need to consider:
  • Microbiological hazards. Microbiological hazards include bacteria, yeasts, moulds and viruses.
  • Chemical hazards. ...
  • Physical hazards. ...
  • Allergens.
19 Oct 2016

What is the most complete definition of a hidden hazard? ›

Hidden hazards are not easily identifiable. They are partially or completely hidden from your view, but still have the potential to develop into a risk.

What are the examples of ergonomic hazards? ›

Ergonomic risk factors are workplace situations that cause wear and tear on the body and can cause injury. These include repetition, awkward posture, forceful motion, stationary position, direct pressure, vibration, extreme temperature, noise, and work stress.

How do people deal with self importance? ›

Steps to Reduce Self-Importance

Actively notice every time your own self-importance causes issues for you or others. Write down every example, professional and personal, in a Self-Importance Journal. Search for patterns and devise new behavioral strategies to change your behavior next time.

When someone is full of their own importance? ›

Narcissistic personality disorder — one of several types of personality disorders — is a mental condition in which people have an inflated sense of their own importance, a deep need for excessive attention and admiration, troubled relationships, and a lack of empathy for others.

What is another word for lacking courage? ›

1. Cowardly, timid, timorous refer to a lack of courage or self-confidence. Cowardly means weakly or basely fearful in the presence of danger: The cowardly wretch deserted his comrades in battle.

What are the ten potential hazards? ›

10 health and safety hazards on the job site
  • Heights. ...
  • Slip-and-falls. ...
  • Electrical hazards. ...
  • Improperly built structures. ...
  • Lack of effective protective gear. ...
  • Improper use of tools. ...
  • Repetitive motion injuries. ...
  • Collisions.
6 Nov 2019

What are the 4 common health hazards in construction? ›

Every year, about 1,000 construction workers are killed on the job. Everyone is familiar with the Focus Four – falls, electrocutions, struck-bys and caught-in/betweens – the four hazards that kill about 90 percent of construction workers.

What is high risk workplace? ›

A high-risk workplace is one where the nature of the work involves high-risk activities and processes – for example, major hazards facilities, construction sites, or sites with mobile plant.

What are 5 ways to identify workplace hazards? ›

Dina Adlouni
  • Collect existing information about workplace hazards.
  • Inspect the workplace for safety and health hazards.
  • Identify health-related hazards.
  • Conduct incident investigations.
  • Identify hazards associated with emergency situations.
15 Mar 2021

What are different types of hazards? ›

What Are The 6 Types Of Hazards In The Workplace?
  • Safety Hazards. Safety hazards can affect any worker, but these are more likely to affect those who work with heavy machinery or on a construction site. ...
  • Biological Hazards. ...
  • Physical Hazards. ...
  • Ergonomic Hazards. ...
  • Chemical Hazards. ...
  • Workload Hazards.

What are the 5 workplace controls? ›

The hierarchy of controls is used to keep employees safe from injury and illness in the workplace. The five steps in the hierarchy of controls, from most effective to least effective, are elimination, substitution, engineering controls, administrative controls and personal protective equipment.

What are the 4 types of safety signs? ›

These 4 important safety signs can be broken into categories: Prohibition, Warning, Mandatory and Emergency.

What is safety example? ›

Safety is a state of being protected from potential harm or something that has been designed to protect and prevent harm. An example of safety is when you wear a seat belt. An example of safety is a safety belt. Any of certain devices for preventing an accident or an undesirable effect.

What is safety in your own words? ›

Safety is a state in which hazards and conditions leading to physical, psychological or material harm are controlled in order to preserve the health and well-being of individuals and the community. It is an essential resource for everyday life, needed by individuals and communities to realise their aspirations.

What is a hazard class 10 it? ›

Ans. A hazard is anything that is the source of any potential harm, damage or any kind of potential loss of health or life.

What is risk in safety? ›

When we refer to risk in relation to occupational safety and health the most commonly used definition is 'risk is the likelihood that a person may be harmed or suffers adverse health effects if exposed to a hazard.

What is an example of safe behavior at the workplace? ›

Always wear protective equipment when working around potential job hazards. Keep their workstations clean and put away their equipment in its designated locations. Follow a safety checklist and ensure that all safety protocols have been performed for every critical task.

What are the 5 main safety signs? ›

The 5 types of health and safety signs are:
  • Prohibition Signs.
  • Mandatory Signs.
  • Warning Signs.
  • Safe Condition Signs.
  • Fire Equipment Signs.
13 Aug 2020

What are job hazards? ›

Examples of hazards include: working at heights, slippery surfaces, exposed moving machinery parts, fire, explosion, noise, electricity, toxic emission, corrosive chemicals, low oxygen, repetitive tasks, heavy lifting, infectious Bloodborne pathogens, assault.

What are physical hazards? ›

Physical hazards include exposure to slips, trips, falls, electricity, noise, vibration, radiation, heat, cold and fire.

How do you handle hazards? ›

Fix the problem
  1. 1 Eliminate the hazard. Remove it completely from your workplace. ...
  2. 2 Substitute the hazard. Replace it with a safer alternative. ...
  3. 3 Isolate the hazard. Keep it away from workers as much as possible. ...
  4. 4 Use engineering controls. ...
  5. 5 Use administrative controls. ...
  6. 6 Use personal protective equipment (PPE)
9 Jun 2022

What are three workplace health and safety responsibilities of an employee? ›

While at work a worker must: take reasonable care for their own health and safety. take reasonable care for the health and safety of others. comply with any reasonable instructions, policies and procedure given by their employer, business or controller of the workplace.

What are the 3 main control measures for slips trips and falls? ›

  • There are many simple ways to control slips and trips risks and prevent accidents in your workplace. ...
  • Use entrance matting. ...
  • Make sure that your cleaning method is effective for the type of floor you have. ...
  • Make sure lighting is sufficient and that slopes or steps are clearly visible. ...
  • supplied free of charge to employees.

What are two safety hazards? ›

Watch out for these home safety hazards
  • Falls.
  • Fires.
  • Carbon monoxide.
  • Choking.
  • Cuts.
  • Poisoning.
  • Strangling.
  • Drowning.

What are the 3 types of food hazards? ›

There are three types of hazards to food. They are • biological, chemical • physical. greatest concern to food service managers and Health Inspectors.

What are some examples of ergonomic hazards? ›

Ergonomic risk factors are workplace situations that cause wear and tear on the body and can cause injury. These include repetition, awkward posture, forceful motion, stationary position, direct pressure, vibration, extreme temperature, noise, and work stress.

What are health hazards in the home? ›

Nearly 6 million households live with moderate to severe housing hazards, including lead paint, water intrusion, injury and safety risks, pests, and electrical deficiencies. These hazards increase the risk for illnesses and injuries including: asthma, falls, respiratory problems and lead poisoning.

What is the examples of physical hazard? ›

Physical hazards include exposure to slips, trips, falls, electricity, noise, vibration, radiation, heat, cold and fire.

What is the example of mechanical hazard? ›

Mechanical hazard factors include just about anything inorganic that moves or can injure you. These include many tools, machines and (moving) vehicles, but also, for example, black ice and even high steps or stairs, if they are not secured against falling.

What is the example of chemical hazard? ›

These can cause fires, explosions, corrosion, and hazardous reactions if not handled safely. Examples of hazardous chemicals include: paints. drugs.

What are two safety hazards? ›

Watch out for these home safety hazards
  • Falls.
  • Fires.
  • Carbon monoxide.
  • Choking.
  • Cuts.
  • Poisoning.
  • Strangling.
  • Drowning.

How can we avoid safety hazards? ›

Sometimes using more than one control measure could be the most effective way to reduce the exposure to hazards.
  1. 1 Eliminate the hazard. Remove it completely from your workplace. ...
  2. 2 Substitute the hazard. ...
  3. 3 Isolate the hazard. ...
  4. 4 Use engineering controls. ...
  5. 5 Use administrative controls. ...
  6. 6 Use personal protective equipment (PPE)
9 Jun 2022

Which is a common hazard? ›

Some of the most common hazards at home include fire, poisoning and allergies. There may also be risks posed by your home's contents, such as falls, choking, cuts and burns.


1. Jordan Peterson - Bill C-16 full debate (U of Toronto) Audio Fixed
2. Trooper Accused of Groping Woman During Traffic Stop
(Inside Edition)
3. Should Your Silver & Gold Be Kept A Secret?
(Mykie DYDSS)
4. Silencing/Denying Your Pain (Starts 16:10): Betrayal Trauma, Blindness
(Prof. Sam Vaknin)
5. Ghosting - Bishop T.D. Jakes
(T.D. Jakes)
6. WWDC 2022 - June 6 | Apple
Top Articles
Latest Posts
Article information

Author: Stevie Stamm

Last Updated: 09/20/2022

Views: 5795

Rating: 5 / 5 (60 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Stevie Stamm

Birthday: 1996-06-22

Address: Apt. 419 4200 Sipes Estate, East Delmerview, WY 05617

Phone: +342332224300

Job: Future Advertising Analyst

Hobby: Leather crafting, Puzzles, Leather crafting, scrapbook, Urban exploration, Cabaret, Skateboarding

Introduction: My name is Stevie Stamm, I am a colorful, sparkling, splendid, vast, open, hilarious, tender person who loves writing and wants to share my knowledge and understanding with you.